Polaris 9-100-3002 Hose Swivel – Keep Your Polaris 360 Cleaner Moving Freely
If your Polaris 360 pressure-side pool cleaner is getting tangled, twisting itself in knots, or stalling in the middle of its cycle, there’s a good chance the hose swivel has worn out. The Polaris 9-100-3002 Hose Swivel is the genuine OEM replacement part designed specifically to restore your cleaner’s full range of motion. This small but critical component connects sections of your cleaner’s feed hose, allowing them to rotate freely and preventing the frustrating tangles that keep your cleaner from doing its job.
When this part works as intended, your Polaris 360 glides smoothly around the pool, climbs walls, and navigates corners without binding. But when the swivel seizes up due to sun exposure, chlorine damage, or mechanical wear, the hose can twist and coil, reducing cleaner coverage and suction power. Replacing the swivel with this factory-authorized part ensures you maintain optimal water flow and cleaning efficiency.
Why the Hose Swivel is Vital for the Polaris 360
In a Polaris 360, the feed hose is made up of multiple sections, each connected by swivels. These swivels serve as pivot points, allowing the hose to spin as the cleaner changes direction. Without a functioning swivel, the hose quickly begins to loop on itself, creating resistance and even causing the cleaner to stall completely.
The Polaris 9-100-3002 Hose Swivel:
-
Provides 360° rotation between hose sections
-
Prevents twisting and kinking
-
Maintains balanced pressure and steady water flow
-
Keeps the cleaner from stalling or getting stuck
-
Reduces wear on feed hoses and other moving parts
This is not just a connector—it’s an essential mobility component for your cleaner.
Designed Exclusively for the Polaris 360
Unlike many Polaris cleaners, the Polaris 360 runs without a booster pump, relying solely on the pool’s return pressure for propulsion. This makes a free-flowing, tangle-free hose even more critical for optimal performance.
Compatibility:
✔ Polaris 360 only
✘ Not compatible with Polaris 180, 280, 380, or 3900 Sport
If you own a different model, check out other genuine Polaris parts like the Polaris G52 Back Up Valve or Polaris All-Purpose Bag – 380/360 for model-specific replacements.
Signs Your Hose Swivel Needs Replacing
-
Hose tangles easily or twists into loops
-
Cleaner gets stuck in corners
-
Reduced water flow or suction
-
Erratic cleaner movement
-
Swivel feels rough, sticks, or has visible cracks
If you notice these symptoms, a worn swivel could be the culprit—and replacing it is a quick, inexpensive fix.
OEM Quality – Why It Matters
The 9-100-3002 Hose Swivel is a genuine Polaris OEM part, meaning it’s made to the exact specifications as the original. You get:
-
Exact fit — no forcing or trimming required
-
Durable construction — UV-stabilized and chemical-resistant
-
Smooth rotation — engineered for consistent movement under pressure
-
Long service life — withstands chlorine and seasonal use
When you use OEM parts instead of cheap aftermarket copies, you ensure your cleaner continues to perform like new.
Quick, Tool-Free Installation
You don’t need a professional to install this part. In just minutes, you can have your cleaner moving freely again.
Steps:
-
Turn off your pool system and remove the cleaner.
-
Locate the faulty swivel between two hose sections.
-
Loosen the hose nuts and slide off the old swivel.
-
Insert the new swivel and reconnect the hose sections.
-
Hand-tighten hose nuts and test for free rotation.
While you’re performing maintenance, you may also want to inspect other wear items like the Polaris UWF Connector Assembly or the Polaris G5 Feed Hose w/ UWF to keep your cleaner running at peak efficiency.
Related Polaris Pool Parts
For a complete tune-up, pair your hose swivel replacement with other Polaris OEM parts:
-
Polaris G52 Back Up Valve – Keeps your cleaner from getting stuck
-
Polaris All-Purpose Bag – 380/360 – Captures fine debris and large leaves
-
Polaris G5 Feed Hose w/ UWF – Restores pressure and suction
-
Polaris Pool Parts Collection – Full range of Polaris replacement parts
These parts work together to ensure full pool coverage, strong suction, and reduced downtime.
Why Buy from Benchmark Pool Supply?
-
Authentic Polaris parts – No fakes or knockoffs
-
Fast shipping – Direct from our Fresno location
-
Expert advice – Our team has hands-on pool equipment experience
-
Competitive pricing – OEM quality without the markup
-
Full Polaris selection – From sweep hoses to drive belts
When you shop with us, you’re getting the parts and the know-how to keep your cleaner running at its best.
Technical Specifications
-
Manufacturer: Polaris
-
Part Number: 9-100-3002
-
Material: UV-stabilized, chlorine-resistant polymer
-
Function: Connects two feed hose sections with 360° rotation
-
Compatibility: Polaris 360 cleaner only
-
Installation: Tool-free, under 5 minutes
FAQs – Polaris 9-100-3002 Hose Swivel
Q: Will this hose swivel fit my Polaris 280 or 380?
A: No. This part is designed only for the Polaris 360. For other models, check our Polaris Pool Parts Collection for the correct swivel.
Q: How often should I replace my hose swivel?
A: Many owners replace it every 2–3 seasons, or sooner if you notice tangling, reduced movement, or visible wear.
Q: Is installation really tool-free?
A: Yes, you can install it by hand in just a few minutes. No special tools are required.
Q: Can a bad swivel cause my cleaner to stop moving?
A: Absolutely. A stuck swivel can create hose tangles and reduce water pressure, which can stall the cleaner.
Q: Should I replace other parts at the same time?
A: If your cleaner is older, it’s smart to inspect the feed hose, UWF Connector, and G52 Back Up Valve while you’re doing maintenance.
